Fiat Punto 2012 User Manual Page 181

  • Download
  • Add to my manuals
  • Print
  • Page
    / 271
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 180
Replace the cylinder containing out-of-
date sealant fluid. Dispose of the cylinder
and the sealant liquid properly. Dispose ac-
cording to the national and local laws in force.
F0U0142m
fig. 153
F0U0141m
fig. 152
INFLATION PROCEDURE
Put on the protective gloves provided
with the quick tyre repair kit.
WARNING
Make sure the handbrake is on. Unscrew the tyre valve
cap, take out the flexible filler tube A-fig. 152 and tight-
en the ring nut B on the tyre valve;
make sure that switch D-fig. 153 for the compressor
is in position 0 (off), start the engine, insert pin E-fig. 154
into the nearest socket and switch on the compressor
by moving switch D-fig. 153 to position 1 (on) Inflate
the tyre to the pressure specified in the “Tyre pressure”
paragraph in the “Technical specifications” section.
For a more accurate reading, check pressure gauge F-fig.
153 with the compressor off;
if after 5 minutes you cannot reach at least 1.5 bar, un-
plug the compressor from the valve and the socket, then
move the car forward about ten metres in order to dis-
tribute the sealant inside the tyre evenly, then repeat the
inflation operation;
179
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
Page view 180
1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 270 271

Comments to this Manuals

No comments