Fiat Panda User Manual download pdf (Page 145)

JACK

Important notes:

❒ the jack weight is 1.76 kg;

❒ the jack requires no adjustment;

❒ the jack cannot be repaired and in the event of a

fault it must be replaced by another original one;

❒ no tool other than its cranking device may be

fitted on the jack.

To change a wheel proceed as follows:

❒ stop the car in a position that is not dangerous for

oncoming traffic where you can change the wheel

safely. The ground must be flat and sufficiently

compact;

❒ switch off the engine, pull up the handbrake and

engage the 1

gear or the reverse gear. Wear the

reflective safety jacket (compulsory by law in

certain countries) before getting out of the car;

❒ open the luggage compartment, pull tab A fig. 101

and lift up the mat;

❒ using the wrench A fig. 102 located in the tool

box, loosen the locking device, take the tool box B

and place it close to the wheel to be replaced.

Then take the space-saver wheel C;

❒ take the wrench A fig. 103 and loosen the fixing

bolts by about one turn;

❒ position the jack under the car, near the wheel to

be changed;

❒ operate the device A fig. 104 to extend the jack

until the top of the jack B fig. 105 fits correctly

into the side member C (next to the mark

the side member);

❒ alert other passengers that the car is about to be

raised; all persons should be kept away from the

car until it has been lowered;

fig. 101

F0W0325

fig. 102

F0W0183

141

GETTING TO KNOW

YOUR CAR

SAFETY

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN

EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 267 268

Comments to this Manuals

No comments

Fiat Panda User Manual Page 145

Comments to this Manuals

Related products and manuals for Cars Fiat Panda